中文
ENGLISHZINSCHE-ZH/ZE Charging System
发布时间：2023-07-31 22:31:09 来源： 德国森泉蓄电池
ZINSCHE-ZH/ZE Charging System
1. Characteristics
The ZH/ZE series automatic charger comes in two models: ZH with fixed charging parameters and ZE with adjustable charging parameters.
The ZH/ZE series is a charger product with novel design, powerful functions, and advanced technology. Has small size and weight
Light weight, simple operation, high charging efficiency and high reliability. It combines high-frequency electronic technology and embedded microcomputer control
The organic combination of charging technology, controlled by a microcontroller, allows the charger to charge according to the set charging curve, allowing the battery to receive the most
Excellent charging effect, effectively extending the service cycle life of the battery pack. The entire charging process is automatically carried out according to the program,
No personnel are required to be on duty.
2. Purpose
The ZH series system charger is dedicated to lead-acid batteries such as AGM, colloid, semi colloid, and rich liquid injection. ZE charging system charger is specially used for Lithium iron phosphate battery; Applicable to electric forklift, pallet truck, Cart, lift truck, Tour bus service and sweeper using Lead–acid battery
Wait for the electric vehicle to charge.
3. Normal working conditions
(1) The altitude does not exceed 1000 meters;
(2) The temperature of the surrounding medium shall not be higher than+40 ℃ and not lower than -10 ℃;
(3) The relative humidity of the air shall not exceed 85% (when the medium temperature is 20 ± 5 ℃);
(4) A place without conductive dust;
(5) Environments without explosion hazards;
(6) Environments that do not contain gases or vapors that can corrode metals and insulation;
(7) In a place where there is no rain or snow;
(8) Places without severe vibration and impact;
(9) This machine should be placed in a ventilated and dry place, avoiding high temperatures, dust, and corrosive gases;
(10) To ensure the normal operation of this machine, it is necessary to maintain unobstructed air around the machine and maintain a certain gap with other objects,
And check if the vent is blocked.
ZH series specification parameters
ZE charging system specifications and parameters
1. Characteristics
The ZH/ZE series automatic charger comes in two models: ZH with fixed charging parameters and ZE with adjustable charging parameters.
The ZH/ZE series is a charger product with novel design, powerful functions, and advanced technology. Has small size and weight
Light weight, simple operation, high charging efficiency and high reliability. It combines high-frequency electronic technology and embedded microcomputer control
The organic combination of charging technology, controlled by a microcontroller, allows the charger to charge according to the set charging curve, allowing the battery to receive the most
Excellent charging effect, effectively extending the service cycle life of the battery pack. The entire charging process is automatically carried out according to the program,
No personnel are required to be on duty.
2. Purpose
The ZH series system charger is dedicated to lead-acid batteries such as AGM, colloid, semi colloid, and rich liquid injection. ZE charging system charger is specially used for Lithium iron phosphate battery; Applicable to electric forklift, pallet truck, Cart, lift truck, Tour bus service and sweeper using Lead–acid battery
Wait for the electric vehicle to charge.
3. Normal working conditions
(1) The altitude does not exceed 1000 meters;
(2) The temperature of the surrounding medium shall not be higher than+40 ℃ and not lower than -10 ℃;
(3) The relative humidity of the air shall not exceed 85% (when the medium temperature is 20 ± 5 ℃);
(4) A place without conductive dust;
(5) Environments without explosion hazards;
(6) Environments that do not contain gases or vapors that can corrode metals and insulation;
(7) In a place where there is no rain or snow;
(8) Places without severe vibration and impact;
(9) This machine should be placed in a ventilated and dry place, avoiding high temperatures, dust, and corrosive gases;
(10) To ensure the normal operation of this machine, it is necessary to maintain unobstructed air around the machine and maintain a certain gap with other objects,
And check if the vent is blocked.
ZH series specification parameters
ZE charging system specifications and parameters
上一篇：返回列表
下一篇：返回列表